Addonics Technologies SCHD SA-FW Manual de usuario descargar pdf (Pagina 175)

Administering an S8400, S8500, or S8700-series primary controller when the S8300 is an LSP

Issue 12 May 2009

175

Note:

Note: It is strongly recommended to use the defaults in the screen. However, for the

RTCP Enabled and RSVP Enabled fields, the entry should be n (no).

3. If the network region of the media gateway (1 in this example) is different from that of the

S8400, S8500, or S8700-series CLAN board(s), you must interconnect the two regions.

Press NextPage twice to display page 3, of the Inter Network Region Connection

Management screen.

This screen shows the source region (1) and the first 15 destination network region

numbers. (Pages 4–19 show destination regions 16–250).

IP Network Region Screen, Page 3

4. Type the number for the type of codec set (1–7) that the S8400, S8500, or S8700-series

Server will use to interconnect the media gateways and the C-LAN board(s) in the row

corresponding to the region of the C-LAN.

In this example, the C-LAN is in region 9 and codec-set type 3 is to be used for the

interconnection between region 1 and region 9. (In this example, codec type 1 is used for

communication within region 1.)

The SAT command, list ip-codec-set, lists the types of codecs available on this server.

For more detail about the Inter Network Region Connection Management form, see

Administering Network Connectivity on Avaya Aura™ Communication Manager,

555-233-504.

5. Press F3 (Enter) when complete.

display ip-network-region 1 Page 3 of 19

Inter Network Region Connection Management

src dst codec direct Total Video Dyn

rgn rgn set WAN WAN-BW-limits Norm Prio Shr Intervening-regions CAC IGAR

11 1

19 3

110

111

112

113

114

115

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 407 408

Sin comentarios

Addonics Technologies SCHD SA-FW Manual de usuario Pagina 175